OPW 295SA & SAJ Aircraft Nozzles

For Heavy-Duty, High-Flow Truck, Bus and Fleet Service

If you operate a full-service truckstop, refuel your own fleet or manage a cardlock refueling location, the low cost, long life and durability of the OPW 7H® high-flow nozzle can help increase your productivity, sales and profits.

Features & BenefitsOrdering SpecificationReplacement PartsDownloads

Features

  • Aluminum Body – lighter weight, easier to maneuver.
  • Dual Poppets – easy-to-open nozzle against high inlet pressures.
  • Color-Coded Composite Lever Guards – helps distinguish between AVGAS and Jet A. Easily replaced in lever guard kit.
  • Right Angle Design – provides larger lever area for better grip and easier control.
  • Vinyl-Coated Lever – insulates fingers against cold.
  • 100 Mesh Strainer – prevents foreign matter from entering fuel tank; easy to remove and clean.
  • Dust Cap – keeps spout free from dirt and stops fuel drippage when connected.
  • Adjustable Dash Pot – permits adjusting the main poppet closure rate over a wide range of flows to overcome line shock with minimum afterflow.
  • Easily Replaced Spout – the spout is easily threaded into the body. Replacement spouts are readily available from OPW.
  • Built-In Swivel – eliminates twisting and kinking of the hose. This swivel is electroless nickel-plated and has full-bearing surfaces.
  • NPT Female Threads at Inlet End of 295SA – accepts all 1″, 1-1/4″ or 1-1/2″ male connections.
  • NPT Female Threads at Inlet End of 295SAJ – accepts all 1-1/2″ male connections.
  • Unique Jet Aircraft Spout Design of 295SAJ – to help prevent inadvertent fueling of piston engine aircraft with turbine fuel.
  • Ground Wire Assembly – included on all aviation nozzles.
Design working pressure
  • 50 psi (3.45 bar) maximum pressure

Materials

  • Body: Cast Aluminum
  • Main Stem: Stainless Steel
  • Stem Seal: Buna-N O-Ring
  • Disc: Viton®
  • Spout: Aluminum

Performance


Ordering Specifications

Product # in. mm lbs. kg
295SA-0135 1 25 4.60 2.10
295SA-0136 1-1/4 32 4.50 2.00
295SA-0137 1-1/2 38 4.50 2.00
295SA-0138 1-1/2 38 5.10 2.30
295SAJ-0200 1-1/2 38 5.60 2.50
295SAC-0156* 1-1/4 32 4.50 2.00
295SAC-0157* 1-1/2 38 4.50 2.00
295SAC-0158* 1-1/2 38 5.15 2.30
295SACJ-0200* 1-1/2 38 5.65 2.60

* Check Valve

Lever Guard Replacement Kits

Product # Nozzle
295KLG-0300 295SA-0135, 0136, 0137, 295SAC-0156, 0157 Red
295KLG-0350 295SA-0138, 275SAC-0158 Red
295KLG-0400 295SAJ-0200, 295SACJ-0200 Black

All lever guard kits include new lever sub-assembly.

295 Series Instruction Sheet Order Number: H09237PA

Replacement Parts – OPW 295SA/295SAC & 295SAJ

Key Part # Description 295SA –
0135
inlet/spout
1″ x 1″
295SA –
0136 &
295SAC –
0156
inlet/spout
1-1/4″ x 1″
295SA –
0137 &
295SAC –
0157
inlet/spout
1-1/2″ x 1″
295SA –
0138 &
295SAC –
0158
inlet/spout
1-1/2″ x 1-1/2″
295SAJ –
0200 &295SACJ –
0200inlet/spout
1-1/2″ x 1-1/2″
1 H02477M Cotter Pin
2 H07719 Main Poppet S/A
3 H09420 Stem & Sec. Poppet
3 H09417 Stem & Sec. Poppet
4 H12706M O-Ring
5 H09367M Spring
6 H05064M Spring
7 H05088M Skirt
8 H05198M Seal
9 H04828M Seal
10 H03981RE Pin
11 H05000M Cotter Pin
12 H07580M Rivet
13 295KLG-0300 Lever Guard Kit*
13 295KLG-0350 Lever Guard Kit*  •
13 295KLG-0400 Lever Guard Kit*
14 H13774M Screw (3 req’d)*
15 295SWK-0007 Swivel Repair Kit**
15 295SWK-0009 Swivel Repair Kit**
15 295SWK-0014 Swivel Repair Kit**
15 295SWK-0013 Swivel Repair Kit**
16 H08886M Dust Seal
16 H01227M Dust Seal
17 H08887M Bearing
17 H08879M Bearing
18 H09713RS Retainer
18 H09712RS Retainer
19 H08881M Thrust Bearing
19 H08889M Thrust Bearing
20 H08882M Lock RIng
20 H08890M Lock Ring
21 H09365M Retaining Ring
21 H09366M Retaining Ring
22 H12319M O-Ring, Buna-N
22 H12320M O-Ring, Buna-N
23 H08884M Bearing
23 H08892M Bearing
24 H06026M O-Ring
24 H07670M O-Ring
24 H11499M O-Ring
25 H05297M O-Ring
25 H07766M O-Ring
25 H10458M O-Ring
26 297SA-9050 Spout S/A
26 297SA-9060 Spout S/A
26 696J-7010 Spout S/A
27 190S-7063 Strainer
27 153-0910 Strainer
27 153J-0100 Strainer
28 H10387 Cap & Chain S/A
28 H10388 Cap & Chain S/A
28 296CJ-0100 Cap & Chain S/A
29 H09212 Body Cap S/A**
29 H09213 Body Cap S/A**
30 H05135M Retainer
31 H08441RS Screw
32 H05087M Felt Wiper
33 H05063M Bushing
34 C02115A Cap
34 C02117A Cap
35 H12707M O-Ring
36 H12705M O-Ring
37 H04825M Adj. Screw
38 190WM-8001 Ground Wire S/A
39 H07062M Screw (4 req’d)
40 H06045M Screws (2 req’d)
41 H13776M O-Ring, Viton®
41 H13775M O-Ring, Viton®

* Replacement part for nozzles built after 08/1998. Part is unavailable for nozzles built before this date.

** Includes 295SRK-0001 or 295SRK-0002 and contact ring.

** Body Cap sub-assembly includes parts 30-37.

Replacement Parts – OPW 295SAC & 295SACJ Only

Key Part # Description 295SAC-0156 295SAC-0157 295SAC-0158 295SACJ-0200
42 H07595M Spring SST
42 H07593M Spring SST
43 H07613M Washer, nylon
44 H09214 Poppet S/A
44 H09215 Poppet S/A

295SRK Seal Repair Kit

Designed for use on 25 series swivels and 295 nozzles, the OPW 295SRK consists of a dust seal, 2 O-rings, 3 button-head screws, hex key and thread sealant.

Product # Used On
295SRK-0001 25 and 295 Series 1″, 1-1/4″ (NPT)
295SRK-0002 25 and 295 Series 1-1/2″ (NPT)

295SRK Materials

  • Body: electroless nickel-plated
  • Bearings: molded plastic
  • Seals: Buna-N O-Ring, felt dust seal, Viton® O-Ring